Brazen Abbot
Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
How to choose solid wood board?
Posted by: quangongzi (IP Logged)
Date: May 25, 2017 02:37AM

Solid wood flooring is based on wood as raw materials, and from top to bottom is a unified material processing. Due to the many advantages of wood, such as easy processing, thermal conductivity filial piety and impact, durability and so on, so that the solid wood flooring has become the most popular flooring materials. Solid wood flooring sub-level, mouth, mouth, vertical mouth, vertical wood and wood polymer composite ksa laminate flooring and several, the current common is the mouth of solid wood flooring, the surface often with a senior polyester varnish, involving solid wood flooring indicators have processing accuracy , Substrate defects, surface paint quality, moisture content and so on.


Processing precision to meet the national standards; substrate defects require edge straight, no burrs, cracks, insects, etc .; surface paint quality, the surface leaching paint on the surface, no bubbling, folds and so on. The specific selection can be used in the middle and both sides of the measurement is consistent, and then 5-8 pieces of the floor together to see whether the fit after the fit, flush, whether the gap between the height and the difference. Moisture content is the most critical indicator, requiring between 8-13%. Water content artificial wood in the philippines is too high and too low will make the wood flooring paved due to changes in the environment from the Alice or cracking. Due to the characteristics of the wood itself, in addition to his many advantages, the main drawback is the expansion of water, affected by the environment.

And the wood floor itself is only semi-finished products, only after the pavement is considered a real product, therefore, the solid wood flooring pavement is very important, if there will be cracking, arched and so on the quality of most of the wood Are due to improper decoration caused. Wood floor garden wall panel with a variety of surface leaching paint and two classes, leaching paint floor can be painted on the cracks in the cracks, the plate after the shop plan to be flat, polished, and then scratching the putty twice, brush paint twice, many people think Solid wood flooring is very delicate, not easy maintenance, in fact, this is a misunderstanding. Just paved the floor, a month to wax seal, according to the actual situation after six months to wax or paint can be.
As the wood was dry shrinkage characteristics. Usually in the maintenance of the main to avoid blisters, winter to prevent the heating water leakage, the air is too dry when the sun can put a pot of water or flower bed made of deck material
humidification humidification, summer attention to moisture, such as waterlessly poured into the floor, The Clean with a semi-dry mop can be, to avoid direct sunlight, heavy furniture do not drag.




Sorry, only registered users may post in this forum.
This forum powered by Phorum.